Do you know how to take care of the electrical part of your home and always keep it in great working order? In this article, we will give you tips to do this, in addition to showing you the most important points to be observed to prevent risks and damages.
Maintaining the proper functioning of the electrical part of your home is important not only to allow the use of electrical appliances but also to ensure the safety of all residents.
Very old installations and worn out wiring can endanger your home and all residents. Electric shocks, short circuits, damaged appliances, and even fires are just a few examples of what can happen if everything is not in ideal condition.
To avoid these risks, it is essential that you take good care of all your installations and always do preventive maintenance periodically. If you don’t know where to start or how to assess the risks, check out the tips we’ve brought below:
Watch out for danger signs
When you notice any kind of electrical problems such as bare wires, constant power surges, burning smell, the constant increase in the electricity bill, high-temperature outlets and damaged appliances or appliances for no apparent reason, you need to double your attention, as this is an indication that the electrical installations are compromised. Performing the necessary repairs as soon as possible can reduce damage and prevent more serious problems.
Take care of the facilities regularly
Do not wait for problems to appear to take care of the electrical part of the house, talk to an electrician and set a deadline to carry out preventive maintenance. When the person is concerned with maintenance before problems arise, the chances of having major losses are much less. Experts indicate that this maintenance should take place at least every 10 years.
Prioritize the protection of the electrical network
Do not skimp on the maintenance of electrical networks, so always invest in the best protection devices. The most qualified devices detect any leakage of current in the installation and immediately turn off the circuit, and this is already a great indication for problems, the DR devices (residual differences) are called hard fingers for pointing out insulation failures and current leakage.
Control cable sizing
It is very important to check if the cable and wire sizing is sufficient. What is the correct gauge for that case? To stay on top of these specifications, it is necessary to respect the standards of NBR-5410, the user is not obliged to understand the electricity procedures or even know how to make the correct calculations, for this it is important to listen well to the electrician and follow his installation recommendations. At this point, it is very important to choose a reliable electrician or electrician.
Avoid workarounds, improvisations, and overloads
There is no point in carrying out maintenance at the correct time if, when carrying out the service or using the equipment, the person does not respect the ideal operating conditions. Connecting several devices to a single outlet, using two or more benjamins, splicing wires inappropriately, using devices with incompatible power, using products of dubious quality and counting on the service of unskilled professionals, all this makes the rich of problems and accidents are huge.
Hire a great electrician
Do not repair yourself, unless you are an electrician! As simple as that repair may seem, the chances of you making a mistake and putting everything in danger is very high.
The function of the residents of the house is always with regard to preventive measures, they must always keep an eye on the premises, monitoring the temperature and the functioning of the appliances, turning off all appliances when going away for a long period, turning off the main switch and all circuit breakers when there is a need to change lamps or clean ceiling fans.
Finally, we will present 6 more important tips to protect your home and reduce the risks related to the electrical part, they are:
- Sockets and circuit breakers must be kept away from sinks, taps or other places where there is water. If this is not possible, take care that the equipment does not come into contact with liquids
- When circuit breakers are frequently tripped, or fuses are blown frequently, it is a sign that the electrical installation in your home is overloaded. In this case, call an electrician to check the wiring
- Never put wires or coins in place of fuses
- Avoid leaving curtains or rugs on electrical wires to avoid a fire in the event of a short circuit
- Unplug the devices every time you notice a fluctuation in the electrical power of your property, and call an electrician
- Shocks when touching the electric shower valve or the refrigerator door are indications that the electrical network is in trouble.
With all this information in hand, now you just have to do good planning for preventive maintenance and keep an eye on the changes in the functioning of the devices and / or the installations of the electrical network. Always remember that prevention is always the best way.